ECLIPSE

ALUMINIUM FALL OUT REMOVER/2-STEP CLEANER

ECLIPSE is medium to heavy duty aluminum cleaner that can be used to remove road film, fall out, rust, oxides, light oils and greases. Leaves etch free finish after cleaning. It is used by trucking companies, aluminum and plastic manufacturers, for exterior cleaning of aluminum trucks and trailers, and other types of aluminum. It can also be used on painted surfaces for a 2-step truck and trailer washing system in conjunction with an alkaline cleaner.

Specification

Directions for Use

Apply ECLIPSE with a low-pressure spray at a concentration from 25:1 to full strength depending on surface soil conditions and temperature. (Use higher concentrations at lower temperatures). Contact time is up to 10 minutes, depending on the end use concentration, soil conditions and temperature. For trucks & trailers, apply horizontally from the bottom up, and then rinse vertically from the top down to avoid streaking.

Pail & Brush: apply as above.

Immersion (plastic tanks only): Use at 10-20% dilution. Immerse for 5-20 minutes. Rinse well with water.

2-Step truck and trailer wash: pre-spray at 2-4%. ECLIPSE can be safely be used on glass. Allow to stand for a few minutes before applying an alkaline cleaner (i.e. MOBIUS, COMMANDO). Then, pressure wash with preferably hot water.

Precautions

Please refer to Material Safety Data Sheet for disposal and handling procedures.

Please refer to the Material Safety Data Sheet for disposal and handling procedures.

Physical Properties

Appearance: clear pink liquid / pH (100%): < 2.0 
Specific Gravity: 1.01-1.02 / Odour: mild

Features

• Aluminium safe

Benefits

• Effectively removes rust, oxides and fall out soils
• Effectively cleans aluminum with out etching
• Safe on glass